The NEW Build Your Own Arcade Controls

Main => Main Forum => Topic started by: SPLATNESS on January 31, 2021, 08:14:34 pm

Title: U-Track question for 3 sided Cocktail
Post by: SPLATNESS on January 31, 2021, 08:14:34 pm

Greetings!

I will try not bore you with too many details and hopefully I will give you enough relevant info...

I like that the U-track will mount in plywood without needing too much work and I don't want to have to build new control panels and change trackballs when/if I change to emulation.

My main question is, can the U-Track work with the icade 60 in 1 board in a Cocktail 2 player configuration, or is it not compatible ?  :dunno There is a set of headers for trackballs on the Jamma board that some of the elcheapo trackballs connect to...

I couldn't find an answer on my own  :banghead:

Thanks~

Title: Re: U-Track question for 3 sided Cocktail
Post by: SPLATNESS on February 05, 2021, 10:15:51 pm

It appears the answer is no...

I contacted Ultamarc and asked if the U-trak would work with a 60 in 1 or if there was an adapter as I have seen for other Trackballs...

Quote

Its not possible to answer this without technical knowledge of the boards trackbell interface. The connector would need to be adapted.


The signals are active-low. This needs to match the input requirements of the board.