The NEW Build Your Own Arcade Controls

Software Support => GroovyMAME => Topic started by: punkysuen on January 14, 2021, 02:33:17 am

Title: Windows 10 unable to get into Testsigning after restart
Post by: punkysuen on January 14, 2021, 02:33:17 am

I fresh installed a computer with Windows 10.
After downloaded crt_emudriver_&_tools_2.0_beta_15_18.5.1_W.10-64, I opened Setup.exe and clicked Install.
It tells me to restart to enter the Testsigning mode.
However, no matter how Manny times I tried, I'm still unable to enter the Testsigning mode.

CPU: AMD A4-4000, HD7480D

Title: Re: Windows 10 unable to get into Testsigning after restart
Post by: Calamity on January 14, 2021, 02:59:40 am

If the installer doesn't enable test singing mode, try this method:

https://docs.microsoft.com/en-us/windows-hardware/drivers/install/the-testsigning-boot-configuration-option

Title: Re: Windows 10 unable to get into Testsigning after restart
Post by: punkysuen on January 14, 2021, 04:18:21 am

Thanks for reply.
I tried the cmd method, but it came with errors.
After few studies, I realized that the issue is due to Enabled Security on the motherboard.
Now everything back to normal, after disabled the motherboard security.

Hope it could help anyone with the same issue in the future.

Title: Re: Windows 10 unable to get into Testsigning after restart
Post by: Zebidee on January 14, 2021, 11:57:42 am

How did you disable security on the motherboard? Via BIOS?

Title: Re: Windows 10 unable to get into Testsigning after restart
Post by: punkysuen on January 20, 2021, 12:20:39 am

Quote from: Zebidee on January 14, 2021, 11:57:42 am

How did you disable security on the motherboard? Via BIOS?

Yes, I turned it off via bios setting.