Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: mister-pizza on July 20, 2020, 10:39:39 am
-
Sorry, I've got another quick question before I order some parts. If I want to use Goldleaf buttons, and select the harness type for 2.8mm switch connectors, will all of these buttons be wired for Goldleaf buttons?
(https://i.imgur.com/Fuj4Vnr.png)
The reason I ask is for player start and coin buttons, and whether I need to order all Goldleaf buttons to be compatible with that wiring harness.
Also, what are 1A/1B/2A/2B used for? Could I use these for pinball flippers?
-
Just checked my one as I do not have coin/start wired in yet, looking at the connections I have left I do have some larger spade connections. So it looks like the Coin/start are wired with the larger spade :)
-
Thanks for the information! :cheers: So I should get a set of four classic pushbuttons (https://www.ultimarc.com/arcade/buttons/classic-pushbuttons/)? And can I use those 1A/1B/1B/2B for extra buttons?
-
The 1A/B and 2A/B can pretty much be assigned to anything, normally used for Admin buttons like escape, They don't have a specific function or default mame setup :) They will want to be connected to goldleafs though as use the smaller spade connector.
-
The 1A/B and 2A/B can pretty much be assigned to anything, normally used for Admin buttons like escape, They don't have a specific function or default mame setup :) They will want to be connected to goldleafs though as use the smaller spade connector.
Good to know, thanks!