Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: MartyMcFly78 on June 22, 2020, 07:25:09 am

Title: Hantarex 9110. Test voltages(B+) disconnected from monitor
Post by: MartyMcFly78 on June 22, 2020, 07:25:09 am

Hi,

Just a simple question.
Can I check the chassis voltages by simply plugging in the power supply? Without connecting the monitor...

Thanks.

Title: Re: Hantarex 9110. Test voltages(B+) disconnected from monitor
Post by: grantspain on June 22, 2020, 09:55:00 am

yes, you need to isolate the HOT centre pin and then add a 40w lamp to ground and pin 1 of the flyback
you will also need to link the centre 2 pins of the deflection yoke header