The NEW Build Your Own Arcade Controls
Main => Artwork => Topic started by: scheerce on June 21, 2020, 07:35:49 pm
-
Hello. I apologize if this is the wrong place. I am new and going crazy. Not sure what all information the geniuses need to help me. New BENQ 27” Monitor. HP Desktop about 4 years old. Intel 4600 built in graphics I believe. Mame .201 running under BigBox with the associated .201 no-intro merged ROM. Bezel project installed for Bezels. All works great, basically. What I am putting my head through the wall over is what maybe called screen tearing. I am not sure. It is not doing it in the game portion of the screen. Only in the side bezels. If I turn them off, I don’t see anything in the black side vertical bars, as expected. With them on the proper artwork shows up, awesome!, but there is a “bar” not completely black, but transparent’ish, like when you see an old monitor on a TV recording an you can see the bar scroll UP the screen. Refresh rate right?? Monitor/video card shows 59H. Everything runs perfect except for these “bars” that scroll UP through the bezel art. Driving me nuts. Help is appreciated.
-
Oddly enough, after 2 months of trying to figure it out, I finally figured it out right after I made this post. I truly search and try everything before reaching out. I read somewhere about mame and refresh sync issues. I saw someone mention triple filtering (or something like that). I ran the mame64.exe outside Bigbox to get into the actual guts of mame and found the triple option in the video settings. I enabled it, which solved my issue. Now, I don't know if that will cause other issues, but on a few games i tested, nothing seemed abnormal.