Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Negativecreep0 on May 20, 2020, 12:50:57 pm

Title: Help wiring a RGB momentary pushbutton to Pacled64 and PC
Post by: Negativecreep0 on May 20, 2020, 12:50:57 pm

Hey guys I would like to use this RGB momentary pushbutton in the diagram its 5v common anode (+) to turn my pc on and off but I would like to control the RGB with the pacled64 controller like the rest of my cab will be controlled. Can anyone edit the included diagram to show me what I would connect where to complete this circuit. For those unfamiliar the pacLed64 is a led controller with common anode(+) connections. Thank you (I would like the led light to come on when the pc is on and off when off)

(https://i.ibb.co/HF1Bcsb/Pacled-Wiring.jpg) (https://ibb.co/0D8m0S6)

Title: Re: Help wiring a RGB momentary pushbutton to Pacled64 and PC
Post by: PL1 on May 20, 2020, 04:16:01 pm

Quote from: Negativecreep0 on May 20, 2020, 12:50:57 pm

Hey guys I would like to use this RGB momentary pushbutton in the diagram its 5v common anode (+) to turn my pc on and off but I would like to control the RGB with the pacled64 controller like the rest of my cab will be controlled. Can anyone edit the included diagram to show me what I would connect where to complete this circuit.

Here you go.   ;D


Scott

Title: Re: Help wiring a RGB momentary pushbutton to Pacled64 and PC
Post by: Negativecreep0 on May 21, 2020, 08:05:49 am

Thank you Scott. I guess I was overthinking trying to figure out how to have the LED only turn on when pc is on and off when pc is off but when the pc is on I guess the Pacled64 would be on and when it is off the power to the pacled64 is off also hence not powering the LED!  :cheers: