Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: toppe on April 19, 2020, 12:28:27 pm

Title: placled64 not detected by pc
Post by: toppe on April 19, 2020, 12:28:27 pm

hello everyone, and the first connection in this forum, a question and thank you who will be able to answer me.
I have a placled 64, suddenly it is not detected by the PC's USB soket (I have also tried on other useless USB ports) it also makes a strange "interference" noise, I state that I use it connected together with other cards on a professional USB HUB, any advice ??
thank you very much

Title: Re: placled64 not detected by pc
Post by: Titchgamer on April 19, 2020, 01:26:27 pm

Bit confused so just to clarify, Are you saying that your PC has several knackered USB ports and you are running this via a hub from one good one?

Or are you saying that the PAC64 does not work in any USB slot?

If its the latter do other devices work?

Title: Re: placled64 not detected by pc
Post by: toppe on April 19, 2020, 01:53:31 pm

yes the other devices work, but right now I did a test, I powered the card with the 5 volts of the PC power supply, and now everything works, mah, why do you think?

Title: Re: placled64 not detected by pc
Post by: Titchgamer on April 19, 2020, 03:19:01 pm

You had the power connected to the USB?
If so that is/was your problem!

The board needs a clean supply voltage :)