Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: baz2963 on March 13, 2020, 02:16:29 pm

Title: Ipac 2 firmware update
Post by: baz2963 on March 13, 2020, 02:16:29 pm

Hi all,

Ive currently got an Ipac 2 on 1.52. I have tried updating to 1.53 but cant get the updating software to register my device, always states nothing connected ?!

Anyone had this issue and got a workaround.

Thanks !

Title: Re: Ipac 2 firmware update
Post by: Bonoscot on March 14, 2020, 05:03:00 pm

Make sure its correct firmware,update it,unplug usb and plug back in.
If is does the same,reinstall the firmware again,happened to me a few times.

Best advice i can give,not many people with info on here recently.

Title: Re: Ipac 2 firmware update
Post by: Hoopz on March 14, 2020, 06:26:45 pm

Email Andy at Ultimarc.

Title: Re: Ipac 2 firmware update
Post by: baz2963 on March 16, 2020, 05:30:32 am

Sorted, make sure winipac is in admin mode.

Title: Re: Ipac 2 firmware update
Post by: tronbaby on March 16, 2020, 08:27:31 pm

Hi all,

Does anyone know a command line method to return to Mode 1 (keyboard) from Mode 3 or Mode 5 (Xinput)?

Thanks