Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: Vectorfire on February 04, 2020, 07:35:06 am

Title: CRT EmuDriver, difficulty identifying proper installer method
Post by: Vectorfire on February 04, 2020, 07:35:06 am

I have acquired a Sapphire Dual-X R9 280 for use with my CRT EmuDriver/GroovyMame project.

according to this thread
http://forum.arcadecontrols.com/index.php/topic,160427.msg1688625.html#msg1688625

The R9 280 is equivalent to the HD 7950 Boost Edition

There are two methods provided for CRT EmuDriver installation process.

- Installing CRT Emudriver 2.0 - HD 4350 (for legacy cards) - Windows 7/8/10 - super resolutions
&
- Installing CRT Emudriver 2.0 - HD 5450 (HD 5000+ cards) - Windows 7/8/10 - super resolutions


This is where I'm getting confused.. I thought only legacy cards had DVI-I, mine has one, but its equivalent cards is a HD 7950 which is higher than 5000, no?

 I clearly don't understand the nomenclature for the card designations.
Which installer method is the correct one for the R9 280?
Thank you all.

Title: Re: CRT EmuDriver, difficulty identifying proper installer method
Post by: Calamity on February 04, 2020, 07:44:28 am

Quote from: Vectorfire on February 04, 2020, 07:35:06 am

but its equivalent cards is a HD 7950 which is higher than 5000, no?

Sure. The "+" in "HD 5000+" intends to mean "or higher". So use the second method (HD 5000+)

Title: Re: CRT EmuDriver, difficulty identifying proper installer method
Post by: Vectorfire on February 04, 2020, 08:51:48 am

Thank you for the clarification!  :notworthy:

Title: Re: CRT EmuDriver, difficulty identifying proper installer method
Post by: Vectorfire on February 07, 2020, 10:48:41 pm

.....................................ignore me  :dizzy: