Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: xbrunox on January 09, 2020, 10:03:41 am

Title: vmmaker Add a modeline on display2 how?
Post by: xbrunox on January 09, 2020, 10:03:41 am

HI Calamity

i've a system with multimonitor an LCD and a 15KHZ CRT  my desktop is setting to extended end i can view what i want to my CRT with switchres.

now... How I can Add a modeline to display2 my crt and not on my display1?
if i add a modeline in vmmaker from a file wmmmaker add it to display1 my LCD not to my CRT.
in Arcade OSD too i view only modeline (resolution) of display1 not of display2... i Need to modify 2560x240 (my super resolution) and after that copy valours in my groovymame ini

thanks

Title: Re: vmmaker Add a modeline on display2 how?
Post by: Calamity on January 09, 2020, 10:11:54 am

In vmmaker->settings->video card, you have a device dropdown menu where you must point to the correct display for new modes.

In Arcade OSD, press "2" to send the window to the correct monitor, then press "attach osd to current monitor".

Title: Re: vmmaker Add a modeline on display2 how?
Post by: xbrunox on January 09, 2020, 10:37:18 am

Thanks!