Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Divergcm2 on February 15, 2004, 11:23:01 am

Title: Left and Right
Post by: Divergcm2 on February 15, 2004, 11:23:01 am

I have an old G07 Monitor and I cannot get it to go left or right to center the picture.

Thanks,

Mike

Title: Re:Left and Right
Post by: Ken Layton on February 16, 2004, 02:10:53 am

Over by the flyback are two jumper wires and six posts. One jumper wire is the "vertical raster shift" marked up-center-down which you move to one of the three posts for that function. Same goes for the "horiz raster shift" marked left-center-right. Don't connect the vertical jumper wire to the horiz (or vise versa) or you'll damage the monitor.