Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: babun on September 28, 2019, 11:09:41 pm
-
Hi,
I am trying to figure out how to connect old HAPP coin door to arcade. I bought what appears to be a 2006 SilkStik arcade cabinet with all the guts but mame PC. It came in with pre-installed and pre-wired coin door that has bunch of connectors wired in.
Should it be connected to some kind of controller that would be wired in to Play 1 and 2 pins on I-Pac board?
There is also a counter and small frame with two red buttons on it (last pic), is that for counting coins and reseting the counter?
https://photos.app.goo.gl/a2bKbJcpMxCg8GiF6
Many thanks in advance!
-
If you're just looking to get it to credit up MAME when a coin is dropped in... Wire orange/violet to Coin1, blue/violet to Coin2, and black to GND. Good luck!
-
The red buttons are probably service buttons. One will add a credit on coin1, the other on coin2.
-
If you're just looking to get it to credit up MAME when a coin is dropped in... Wire orange/violet to Coin1, blue/violet to Coin2, and black to GND. Good luck!
This ^
The 2 red buttons will be Test and Or Service switches.
And yeah the counter is to count coins.
-
Ah yes, one could be a test button. Can't tell without seeing what they're wired up to.