Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: peterrrjr on May 26, 2019, 01:30:13 pm

Title: 2 Player CP with trackball and spinner in pdf?
Post by: peterrrjr on May 26, 2019, 01:30:13 pm

Hi veryone, I need some help.

I am looking for a control panel layout in pdf or jpg to use as a template to drill the holes in my arcade build.

I founs a lot of images but most of them are not in real size, scaled down. I do not own imaging software neithor know how to draw it anyway so, any help wouild be appreciated.
It does not matter the size (1 playr, 2 player or 4 player CP), I just need it to have the trackball and spinner in real world size, so I can print and paste tehm om my mdf sheet as I wish and cut the holes.

Thanks!

Title: Re: 2 Player CP with trackball and spinner in pdf?
Post by: Nephasth on May 26, 2019, 01:35:56 pm

Tape measure. Mark the center. Drill baby.

If you don't own a tape measure, click here: http://forum.arcadecontrols.com/index.php/board,22.0.html

Title: Re: 2 Player CP with trackball and spinner in pdf?
Post by: markc74 on May 26, 2019, 03:33:51 pm

 Spinners (turbo twist / spin trak at least) both use standard button hole sizes so 28mm or 1 1/8"

Your trackball may vary depending on make and size. What model is it?

For joystick layouts then slagcoin is the best place to start:

https://www.slagcoin.com/joystick/layout.html

Title: Re: 2 Player CP with trackball and spinner in pdf?
Post by: Mr. Peabody on May 29, 2019, 07:17:38 pm

In essence, use your controls to mark spots.