The NEW Build Your Own Arcade Controls
Main => Main Forum => Topic started by: nipsmg on May 21, 2019, 12:54:18 pm
-
I've got one of the older Ipac 4 board with the PS/2 connectors on it. I'm using it over usb with the supplied cable.
The board works perfectly except for the shifted keys. When I assign a p1/p2 shift key to, say, P2 start and program the board, the following happens:
1. The start key now only registers when I let go of the button
2. The "left mouse" action I applied to the "P1 Sw1 shifted" key does not fire when I click P1SW1 while holding P2Start.
Does anyone have any feedback / suggestions?
-
1. The start key now only registers when I let go of the button
That's normal operation for shifted functions.
When you press Start (shift), the IPac doesn't know if you want to do Start or a shifted function.
- If a button with a shifted function is pressed before you release Start, it sends the shifted function keystroke immediately.
- If no button with a shifted function is pressed before you release Start, it sends the Start keystroke.
Scott
-
You should be getting that left mouse press while holding down the shift key.
I would test a normal letter key as a shifted key first, so that you can confirm it works in a blank document before trying mouse functions.
-
ok, so the a letter key works when assigned as a shifted function, but the mouse button assignments don't work :-/