Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: nipsmg on May 07, 2019, 10:07:55 am
-
All,
I've got a 25" williams smashTV cabinet that was converted to tekken 3. It has a 25" K7000 in it taht I did a tube swap with.
I'm stripping the cabinet of old wiring and trying to keep what's needed for the monitor.
There are yellow wires coming off the bottom of the isolation transformer that are run to the front of the cabinet where there is a fuse holder and a fuse. Are these required to use the isolation transformer? Should I extract these wires and keep them?
(https://i.imgur.com/2OQx672l.jpg)
(https://i.imgur.com/t7AqKiBl.jpg)