Build Your Own Arcade Controls Forum
Main => Driving & Racing Cabinets => Topic started by: TipsyMcStagger on April 16, 2019, 10:52:20 pm
-
Hi All,
I'm picking up a Sega Super Hang-on ride on cabinet but unfortunately the seller destroyed the monitor pedestal cabinet and appears to have thrown out the monitor and support brackets. Just checking if anyone has one of these and might be able to provide me with some measurements to allow me to build a new cabinet.
Thanks,
Andy
-
Bump. Does anyone have measurements at all?
Sent from my SM-G975F using Tapatalk
-
That machine is rare. I have an upright, so cannot help. Did you open a similar topic on KLOV? You will have better luck eventually ;)
-
That machine is rare. I have an upright, so cannot help. Did you open a similar topic on KLOV? You will have better luck eventually ;)
Thanks mate. I have posted on klov & AA also
Sent from my SM-G975F using Tapatalk
-
I'm restoring one here: http://www.ukvac.com/forum/sega-super-hang-on-deluxe_topic351963.html (http://www.ukvac.com/forum/sega-super-hang-on-deluxe_topic351963.html)
(https://photos.smugmug.com/SuperHangon/i-GL2cstf/0/14a1b37b/X3/P5210162-X3.jpg)
-
I'm restoring one here: http://www.ukvac.com/forum/sega-super-hang-on-deluxe_topic351963.html (http://www.ukvac.com/forum/sega-super-hang-on-deluxe_topic351963.html)
(https://photos.smugmug.com/SuperHangon/i-GL2cstf/0/14a1b37b/X3/P5210162-X3.jpg)
Thanks mate
Sent from my SM-G975F using Tapatalk
-
Would you mind to share the stickers scans sheet you showed in the topic linked? My upright is in the need for some of those ;)
-
I too am interested in the stickers.
I just picked up this. My first arcade cab ever!
https://www.facebook.com/groups/2370133573/permalink/10160366632048574/