Build Your Own Arcade Controls Forum

Arcade Collecting => Merit/JVL Touchscreen => Topic started by: mickster150 on March 25, 2019, 04:59:34 pm

Title: inverter board source for megatouch rx monitors
Post by: mickster150 on March 25, 2019, 04:59:34 pm

I have a megatouch rx with a dead screen.  Is there a source for inverter pcbs for this particular monitor?

Just hoping to revive yet another broken megatouch!

thanks,
mickey

Title: Re: inverter board source for megatouch rx monitors
Post by: lilshawn on March 26, 2019, 01:23:11 am

Original boards are stupid expensive. You can order them from Ami I believe.

You can find a redesigned replacement from lcdparts.net they are kinda stupid expensive there too.

I personally buy universal invertor from ebay, wire them in (the lvds board has the pinout silkscreened on the board connector)  and just double sided tape them on the outer side of the monitor (inside is not enough room.)