Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: JRChristenson on March 02, 2019, 11:42:32 am

Title: Gold Leaf Button Question
Post by: JRChristenson on March 02, 2019, 11:42:32 am

If anyone has an Ultimarc gold leaf button handy I was wondering what the measurement is from the bottom of the actual button to the bottom of the entire thing. For example on this Happ button that measurement is 2 1/4". Thanks.

Title: Re: Gold Leaf Button Question
Post by: JDFan on March 02, 2019, 12:04:37 pm

IF measuring for a reason like the bottom of the cab being there - you might want to redo your Happ measurement - On them the Microswitch adds more depth than your 2 1/4" measure shows - ( I know cause I had to cut out part of the bottom panel of my build when it would not fit with the microswitch in place !!   :banghead: )

Title: Re: Gold Leaf Button Question
Post by: JRChristenson on March 02, 2019, 12:10:54 pm

Yeah I know but the gold leaf buttons have the microswitch integrated.

Title: Re: Gold Leaf Button Question
Post by: Drnick on March 02, 2019, 12:54:35 pm

https://www.arcadeworlduk.com/products/awuk-gold-leaf-style-convex-arcade-button.html (https://www.arcadeworlduk.com/products/awuk-gold-leaf-style-convex-arcade-button.html)  (Says same as Goldleaf but with convex buttons) only other goldleaf are the ultimarc gold leaf on there that I saw.

Title: Re: Gold Leaf Button Question
Post by: PL1 on March 02, 2019, 01:09:58 pm

Quote from: JRChristenson on March 02, 2019, 11:42:32 am

If anyone has an Ultimarc gold leaf button handy I was wondering what the measurement is from the bottom of the actual button to the bottom of the entire thing.

Bottom of bezel to bottom of button body is 1.318". (33.44mm)

Regular QDs will extend below the button body.

IL and Goldleaf buttons installed on 3/4" MDF:
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=132565.0;attach=290318;image)


Scott