Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: rancid on December 28, 2018, 11:21:53 pm
-
Evening all,
New user here, but long-time lurker. I finally built myself a PC to try out emudriver and am running a 4770 i7 with a radeon r9 380x. I installed windows 10 fresh and installed the Radeon drivers by default. I downloaded the correct emudriver package for my setup and went into testing mode to install emudriver. I followed the guides off Calamity's website and it never asked me for a certificate install which threw a red flag in my mind, but figured this was related to Windows 10. After the install I created a custom super-resolution ini file and loaded up VMMaker using Admin rights. Below is the output from the console screen:
_____ _____ _____ _
| | | | |___| |_ ___ ___
| | | | | | | | | .'| '_| -_| _|
\___/|_|_|_|_|_|_|__,|_,_|___|_| 2.0 beta 14 by Calamity - 2008/2017
Processing config...
>>display init \System\CurrentControlSet\Control\Video\{A6AAB520-0B0E-11E9-BDD1-3417EB976ECD}\0000
Listing display devices...
\\.\DISPLAY1 - AMD Radeon (TM) R9 380 Series - 27inch DVI - enabled - HKLM\System\CurrentControlSet\Control\Video\{A6AAB520-0B0E-11E9-BDD1-3417EB976ECD}\0000
\\.\DISPLAY2 - AMD Radeon (TM) R9 380 Series - No monitor - disabled - HKLM\System\CurrentControlSet\Control\Video\{A6AAB520-0B0E-11E9-BDD1-3417EB976ECD}\0001
\\.\DISPLAY3 - AMD Radeon (TM) R9 380 Series - No monitor - disabled - HKLM\System\CurrentControlSet\Control\Video\{A6AAB520-0B0E-11E9-BDD1-3417EB976ECD}\0002
\\.\DISPLAY4 - AMD Radeon (TM) R9 380 Series - No monitor - disabled - HKLM\System\CurrentControlSet\Control\Video\{A6AAB520-0B0E-11E9-BDD1-3417EB976ECD}\0003
\\.\DISPLAY5 - AMD Radeon (TM) R9 380 Series - No monitor - disabled - HKLM\System\CurrentControlSet\Control\Video\{A6AAB520-0B0E-11E9-BDD1-3417EB976ECD}\0004
\\.\DISPLAY6 - AMD Radeon (TM) R9 380 Series - No monitor - disabled - HKLM\System\CurrentControlSet\Control\Video\{A6AAB520-0B0E-11E9-BDD1-3417EB976ECD}\0005
Getting driver information for \\.\DISPLAY1
ADL Library found, retrieving functions...
Connector 3 DVI-I
Connector 2 DVI-D
Connector 1 HDMI-A
Connector 0 DisplayPort
ADL functions retrieved successfully.
CRT Emudriver 2.0 (15.8) found.
I set the preset to Arcade 15khz, under video card tab it shows DISPLAY1 R9 380 Series *27inch DVI enabled* Driver is CRT Emudriver 2.0 (15.8) Method AMD Display Library. I have Auto selected, unchecked extend desktop and here is where I get stuck. Under EDID emulation there is absolutely NOTHING in the drop-down list to select the Connector 3 analog output. I have tried everything possible to populate this list and nothing happens. When I select emulation it changes it to say current preset is arcade_15 (see below)
(https://i.imgur.com/0ooXkXv.jpg)
Under user modes tab I have get video modes from user list and selected my custom file and changed the mode to static. I changed the MAME tab to point to my groovymame install and when I click generate modes it comes back successful. I then click install modes and it processes all 77 that I have listed without error. My screen resolution never changes on my LCD screen to 640x480 and windows does not see a second monitor, nor does the EDID change from what I can tell (verified in Custom Resolution utility).
What am I missing here? I've spent close to 6 hours straight and am about to format and try Windows 7.
Ty for any help in advance!
-
Output of my Arcade OSD which makes it seem like the resolutions are there. I do not see a way to enable any resolutions under 800x600 in Windows Resolution panel.
I forgot to mention in my last post the issue is when I unplug my LCD and plug in my PVM I am getting a double image because the resolution is not displaying correctly. I can't set it to a lower resolution than 800x600 on the desktop.
(https://i.imgur.com/4BEu235.jpg)
(https://i.imgur.com/RAbotgW.jpg)
-
For those googling, issue was borked driver install. I re-did the entire setup and ran catalyst driver uninstaller, rebooted, and installed Emudriver by itself without the standard radeon driver set.
-
For those googling, issue was borked driver install. I re-did the entire setup and ran catalyst driver uninstaller, rebooted, and installed Emudriver by itself without the standard radeon driver set.
Yes, I did this once as well. You can not have manufactures drivers installed. I installed them with my hd4350 so I could get some performance with lcd, but figured out when it was time for crt I needed to uninstall them first before installing calamity drivers.