Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Dallinj on December 21, 2018, 02:20:41 pm

Title: How Do I Wire my Admin Buttons?
Post by: Dallinj on December 21, 2018, 02:20:41 pm

Hey guys, I've had some generic black buttons sitting lifelessly in my cabinet for a while now, and decided I should try and get them wired up to my board. It's two black buttons that will be wired up to the player 1 interface (I'm using pretty cheapy amazon led button boards) and I'm not sure how, or in what order I need to wire everything up. Any help would be appreciated. https://imgur.com/a/aHDrIue (https://imgur.com/a/aHDrIue)

Title: Re: How Do I Wire my Admin Buttons?
Post by: barrymossel on December 28, 2018, 03:15:31 pm

I don't know the board, but how are your other buttons wired? They have four cables attached I guess? Identify those and see which one goes to the white red connector (with three cables) on the board. The other two cables from the connector are connected to the switch itself. Those two you should connect to your admin buttons, order shouldn't matter.