Build Your Own Arcade Controls Forum
Arcade Collecting => Merit/JVL Touchscreen => Topic started by: jokerz4fun on November 04, 2018, 09:11:11 am
-
Hey guys. I just started a new Megatouch ion project and when it boots it hangs at entering noninteractive startup. I've tried different hard drives, memory, and I O boards. And I still have the same issue any ideas? Is this bios related? I did log into the BIOS at startup and everything seems to be set to normal default. Motherboard is Asus A7N8X-LA
-
Looks like its hanging right before the sensor and hardware checks. If i had to guess faulty Motherboard. Check to see if there is any capacitors that are swelling.
-
"Cannot enable port 1, maybe the usb cable is bad"
Never seen that, but I'm guessing something connected to the motherboard or the mobo itself is holding it up.
-
I worked on it last night and believe it or not it was the USB cable. I swapped it out and it booted right up. Just need to figure some issues out with the io board and I should be all set! thank you guys for all the help I really do appreciate it.