Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Rje11781 on October 18, 2018, 12:50:18 pm

Title: Arachnid super 6 plus 2
Post by: Rje11781 on October 18, 2018, 12:50:18 pm

I just recently got one of these for free and the connector for the coin credit board is gone so only the wires are there. I have a new connector that will work for it but I'm not sure where the wires are suppose to go. Anyone have a picture of how the wires go? Or a diagram? Thank you for any help.

Title: Re: Arachnid super 6 plus 2
Post by: Ken Layton on October 18, 2018, 09:53:12 pm

Service information and schematics are here:

http://www.arachnid360.com/index.php/commercial-products/legacy-dartboards/6000-series-dartboards/ (http://www.arachnid360.com/index.php/commercial-products/legacy-dartboards/6000-series-dartboards/)

http://arcarc.xmission.com/PDF_Darts/Arachnid/ (http://arcarc.xmission.com/PDF_Darts/Arachnid/)

https://sites.google.com/site/mtpacifico/kens_korner (https://sites.google.com/site/mtpacifico/kens_korner)

Title: Re: Arachnid super 6 plus 2
Post by: pbj on October 18, 2018, 10:15:25 pm

I'm trashing one of these right now. Come to Houston, take the parts.

Title: Re: Arachnid super 6 plus 2
Post by: Hobbyist on December 10, 2018, 09:55:41 pm

Do you have a working power supply from it?

Title: Re: Arachnid super 6 plus 2
Post by: pbj on December 11, 2018, 09:33:22 am

Maybe.  I threw out the dartboard, spider, and some of the cabinet pieces.  Think I still have a boardset and power supply that will last until I carry it to the trash can.

Title: Re: Arachnid super 6 plus 2
Post by: Hobbyist on December 11, 2018, 09:21:34 pm

Im not too sure of the rules of these boards, so apologies in advance but would you consider mailing me the parts you have? I can pay postage and send you a mailing slip through email if you are comfortable with that. On another not the reason I think i may have a power supply/board issue, that I am still troubleshooting. I have a 6300 with coin credit card, i started having issues with my machine a few months back it would say that 4 Single is stuck but after resetting the machine it would go away. However now its not going away, i unplugged the matrix from board while powered off and it still says stuck on 4 single when i get into a game. Not sure if you have even seen this kind of issue before. I've been pouring over service manuals and bulletins but havent come across the same issue, just similar but not close enough to say that its the problem i am having. ANY tips you have is much appreciated!!!
 

Title: Re: Arachnid super 6 plus 2
Post by: pbj on December 16, 2018, 05:14:26 pm

I have a board, power supply, and wiring harness. Would be shipped from 77030.  Probably a good 10-15lbs.

Lmk

Title: Re: Arachnid super 6 plus 2
Post by: Hobbyist on December 18, 2018, 01:57:56 pm

That would be fine, i was on vacation in Gatlinburg so i didnt see your message, ill see if i can get a shipping label after i get off work and ill pm you.

Title: Re: Arachnid super 6 plus 2
Post by: Ken Layton on September 15, 2019, 01:56:01 am

Any resolution to the problem?