Build Your Own Arcade Controls Forum
Main => Audio/Jukebox/MP3 Forum => Topic started by: bryn.321 on October 14, 2018, 02:37:44 pm
-
hi need to replace foam on front mid high speaker, can anyone advice on where to purchase this and the size thnx
-
Hello Bryn,
We do offer a replace foam surround service.
Send me a PM for details.
Regards
Alan
Alan Hood
ami-man
UK
-
hi Alan fixed the speaker but now another problem on my r83, until I removed speaker the 1 under the key board all was fine its been ok since you fixed all the boards for me then later serv the amp, but now it wont select and carousel keeps turning, would it be me when removing speaker ?? thanks bryn.
-
Hello Bryn,
It was good to speak to you yesterday, once we have your boards back for testing/repair we can sort out the problem and also fix your missing pixels on the display.
Regards
Alan
Alan Hood
ami-man
UK
-
Hi Alan, after pulling out plugs to selector and back in all seems fine now tried it a dozen times over the wk and works with out a fault, still need pixels doing on key board and need to no what parts you need now to do this many thanks Bryn.
-
Hello Bryn,
To sort out the display pixel problem out I would need the display board complete with its atached loom and the selector logic board.
Regards
Alan
Alan Hood
ami-man
UK
-
Hi Alan, still got fault with selector so will send all 3 boards and pixel display to you with in the next day many thanks Bryn.
-
Hello Bryn,
I will let you know what I find on receipt of your boards.
Regards
Alan
Alan Hood
ami-man
UK
-
Hi Alan, boards back in all working as it should, many thanks Bryn.
-
Hi Bryn,
Thank you for letting me know. At least you will be rocking now for Christmas.
Regards
Alan
Alan Hood
ami-man
UK