Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: ghost13500 on July 10, 2018, 08:57:22 am

Title: CRT Emu Driver + Amd APU A12 9800e = Installation Error 103
Post by: ghost13500 on July 10, 2018, 08:57:22 am

Hello

Try to install CRT Emu driver on this hardware without success :

- APU A12 9800e (R7 graphics) (https://www.amd.com/en/products/apu/7th-gen-a12-9800e-apu (https://www.amd.com/en/products/apu/7th-gen-a12-9800e-apu))
- 4Go
- Fresh Windows 10 install  (build 17134)

I've downloading this driver (CRT Emudriver & CRT Tools 2.0 beta 13 (Crimson 16.2.1 for GCN* cards) for Windows 7/8/10 64-bits ) :
- https://drive.google.com/open?id=1HYtmxr_Bla3RtVww4lXDVbe7plvHKO2S (https://drive.google.com/open?id=1HYtmxr_Bla3RtVww4lXDVbe7plvHKO2S)


When I start setup, after "Compatibles Devices : Graphic Card VGA standard" screen, I click "Install Driver" and failed/stop installation with this message :
"Error: The driver installation failed: 103 No data Available"

Someone know how force installation ?  ???

Title: Re: CRT Emu Driver + Amd APU A12 9800e = Installation Error 103
Post by: Calamity on July 10, 2018, 11:59:41 am

Similar issue here: http://forum.arcadecontrols.com/index.php?topic=154587.0 (http://forum.arcadecontrols.com/index.php?topic=154587.0)

I think it may be due to the pci id not being listed in the driver's inf. If that's the case, you'll need to wait for the next Emudriver update, sorry.

Title: Re: CRT Emu Driver + Amd APU A12 9800e = Installation Error 103
Post by: ghost13500 on July 10, 2018, 12:21:56 pm

Sorry for this duplicate issue

Thanks for your work on this drivers, i'll be waiting next release   ;D

Title: Re: CRT Emu Driver + Amd APU A12 9800e = Installation Error 103
Post by: Calamity on July 10, 2018, 04:47:28 pm

If possible, post your gpu PCI id so I can check if that is the problem.

Title: Re: CRT Emu Driver + Amd APU A12 9800e = Installation Error 103
Post by: ghost13500 on July 10, 2018, 05:42:20 pm

Here :

PCI\VEN_1002&DEV_9874&SUBSYS_1E311002&REV_E3

I think it is the problem,
I've just force manual installation (i've choose manually drivers folder, "AMD Radeon R7 Graphics") and that's work.

CRT Emu Driver installed and detected by Vmmaker...but I've strange slowdown's feeling when I move windows  :-\
Also in opengl apps (like retroarch), I notice slowdowns  (It's better if  I choose direct3d driver in).

In groovymame it's ok (d3d9) but there's also some very litte slowdowns.

Perhaps it's caused by my manual/partial installation ? Or CRT EmuDrivers based version (CRIMSON 16.2.1) is too old for good performance with APU R7 ?
When i try "normal" drivers, it's ok

In all cases, I can wait next version don't worry !

Title: Re: CRT Emu Driver + Amd APU A12 9800e = Installation Error 103
Post by: Calamity on July 11, 2018, 11:09:37 am

Thanks!