Build Your Own Arcade Controls Forum
Arcade Collecting => Merit/JVL Touchscreen => Topic started by: mshort520 on May 25, 2018, 07:03:47 pm
-
I have a JVL Retro that threw the "interface board battery is low" message. I soldered in a new battery, but I still get the same message. The new battery measures 3.66 volts with the machine running or off. Have any of you seen this problem? Thanks
-
Did you try doing a factory reset after you replaced the battery?
-
No I didn't. How do I perform a full factory reset?
-
press and hold the yellow setup button during boot up till it goes to the factory reset screen.
-
That's what I thought but when I hold in the yellow set up button, then turn on the machine, then continue to hold it , the machine just boots up normally. When the machine is on the set up button operates as it should. Tried it 4 times in a row and it always booted up normally. ??? I'm running itouch 10+
-
Maybe the Interface board is faulty? I have had the low battery issue, and even after replacing with another 3.6v battery, got the same message, but after a factory reset the error was fixed.
-
Finally got it to reset (just kept trying) and now the error message is gone. :applaud: Thank you for the help.
-
You are welcome. :cheers: