Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: rocomat on April 17, 2018, 06:48:14 pm

Title: Sanyo 14" - Identify RGBS signals?
Post by: rocomat on April 17, 2018, 06:48:14 pm

Hi!

Can someone help me to identify the RBG and S and Ground signals code? (cable has 5 signals) from this Sanyo 14" cocktail monitor?

I looked at the manual, I can not see RGB or Sync or what is the 5th input, I thing Ground.
Page 3 "E. Connectors" shows the pin numbers and the signal, but who knows the pin numbers from that old connector?  If it would be shown that would help...

Manual: http://files.arcadeinfo.de/Monitore/Sanyo%2014''%20Color%20TV%20Monitor.pdf (http://files.arcadeinfo.de/Monitore/Sanyo%2014''%20Color%20TV%20Monitor.pdf)

There's not print for this cable on the board.
See the white cable with diffent red dots at middle - bottom.
(https://iankellogg.com/pub/media/catalog/category/Sanyo_14-AZZ.JPG)

thanks!

Title: Re: Sanyo 14" - Identify RGBS signals?
Post by: rocomat on April 17, 2018, 08:11:13 pm

Got ist, went to the resistors and this way I could identify the cable code.

Title: Re: Sanyo 14" - Identify RGBS signals?
Post by: buttersoft on April 17, 2018, 08:26:49 pm

From the top down, was it R, G, B, ground, empty, sync?