Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: brewerdude on April 07, 2018, 01:30:13 pm

Title: Trackball Question
Post by: brewerdude on April 07, 2018, 01:30:13 pm

About 3 years ago, I mothballed my cabinet build project.  I recently took it out of storage and started working on it again.  To my dismay, I found that one of the wires on my Ultimarc Trackball became disconnected.  Which pin does the red wire get soldered to?

Title: Re: Trackball Question
Post by: AndyWarne on April 07, 2018, 06:00:18 pm

This is an old version. But you can refer to the other connector. The red is located on the same pin on both connectors.

Andy

Title: Re: Trackball Question
Post by: brewerdude on April 08, 2018, 01:19:05 am

Thank you!