Build Your Own Arcade Controls Forum
Main => Project Announcements => Topic started by: Hursit on December 05, 2017, 10:28:37 am
-
Hello guys.
I finished my Custom Vewlix Diamond Edition Cabinet.
I made it by MDF. You can see the all images of the whole process.
The whole process is about 2 months. I didn't work full time.
I design it for PC and PS3 for now. But after Niko Release the Nesica Multi system, i will put my Taito Type X2 main board in the cabinet. And i will wire the all system for jamma.
For now Im just using it with Attract mode Fronted.
You can watch the video:
https://www.youtube.com/watch?v=5MU4wOEq8dQ&t=15s (https://www.youtube.com/watch?v=5MU4wOEq8dQ&t=15s)
First 3D Drawing.
(https://i.hizliresim.com/BAOO2V.png)
(https://i.hizliresim.com/ZE55Yg.png)(https://i.hizliresim.com/okddEQ.png)
(https://i.hizliresim.com/lWQQEB.png)
(https://i.resimyukle.xyz/y5GM9c.png)
(https://i.resimyukle.xyz/5RKzB0.png)
(https://i.resimyukle.xyz/BV1PRJ.png)
Main Case
(https://i.hizliresim.com/vpaabp.png)
(https://i.resimyukle.xyz/39yHN9.jpg)(https://i.resimyukle.xyz/9H7CSf.jpg)(https://i.resimyukle.xyz/2CfTz7.jpg)
I draw the all Control Panel layout as Vector graphic with Adobe Illustrator.
(https://i.hizliresim.com/7NnjNP.png)(https://i.hizliresim.com/PrWjr6.png)
(https://i.hizliresim.com/gW0QWZ.png)
More Wood job
(https://i.hizliresim.com/VMnjlZ.png)
Control Panel
(https://i.hizliresim.com/RP5n3Z.jpg)
(https://i.hizliresim.com/pWQ6PJ.jpg)
(https://i.hizliresim.com/N1QZEQ.jpg)(https://i.hizliresim.com/N1QZEQ.jpg)
Side Parts. Made by 2 MDF (18mm)
(https://i.hizliresim.com/YNGgEl.jpg)
(https://i.hizliresim.com/8dyYLQ.jpg)
Its a small hole for the monitor bezel. It is sliding. It can be remove easily
(https://i.hizliresim.com/aGZz7g.jpg)
(https://i.hizliresim.com/YNGgoE.jpg)
Back
(https://i.hizliresim.com/5QODlz.jpg)
Fake Nesica Card Reader :P :D
(https://i.hizliresim.com/7NG6la.jpg)
(https://i.hizliresim.com/Prbly7.jpg)
These are not MDF. It is wood.
(https://i.hizliresim.com/gW1O7b.jpg)(https://i.hizliresim.com/okMObq.jpg)
Top Layer. I fiex 6 pieces of MDF then sanding :)
(https://i.hizliresim.com/mJ8J3P.jpg)
(https://i.hizliresim.com/EyEygq.jpg)
(https://i.hizliresim.com/2EQErN.jpg)(https://i.hizliresim.com/nJGJRR.jpg)
Monitor Bezel
(https://i.hizliresim.com/By9yrD.jpg)
(https://i.hizliresim.com/ZO1OZk.jpg)
(https://i.hizliresim.com/o6z6j7.jpg)
(https://i.hizliresim.com/V3y30P.jpg)
(https://i.hizliresim.com/lbzbdE.jpg)
All Finished before painting.
(https://i.hizliresim.com/1GnGlN.png)
Lets paint it.
After Paint.
(https://i.hizliresim.com/o60O6o.jpg)(https://i.hizliresim.com/vJXjJO.jpg)
Marquee Arts And Side Arts and Control Panel Before printing.
(https://i.hizliresim.com/rJ6OOB.png)(https://i.hizliresim.com/7y766m.png)
After UV Print on the Plexi Glass Directly. ( Not Paper )
(https://i.hizliresim.com/V3Pr3q.jpg)(https://i.hizliresim.com/nJjOJ1.jpg)(https://i.hizliresim.com/ZOM9O0.jpg)
Lets Bring my home :P
(https://i.hizliresim.com/ByzW3M.jpg)
Samsung 32" TV
(https://i.hizliresim.com/4GzQDY.jpg)
Other staff
(https://i.hizliresim.com/1GEaqN.jpg)(https://i.hizliresim.com/vJPAr4.jpg)(https://i.hizliresim.com/LOD8mZ.jpg)
Metal part for control panel. I put it under the Plexi Glass. Metal is 1.2mm thick. And Plexi is 2.8mm
(https://i.hizliresim.com/lbZPmr.jpg)(https://i.hizliresim.com/ZO3jmV.jpg)
Hımm Not Bad
(https://i.hizliresim.com/nJl9ZM.jpg)(https://i.hizliresim.com/V3D8mv.jpg)(https://i.hizliresim.com/o6Vqo9.jpg)
I covered the whole Marquee plexiglass glass with Car Glass Film.
(https://i.hizliresim.com/OyrP3D.jpg)
Side Arts
(https://i.hizliresim.com/0G0Q4B.jpg)
Control Panel
(https://i.hizliresim.com/4Gp5ZG.jpg)
Other arts :) for the instruction panels.
(https://i.hizliresim.com/mJp611.jpg)(https://i.hizliresim.com/ByNPDv.jpg)(https://i.hizliresim.com/rJpMZN.jpg)(https://i.hizliresim.com/1GBvMp.jpg)
Speakers. (4pc)
(https://i.hizliresim.com/ZOpk7Z.jpg)
Wiring buttons and joystick. I made it as a socket. It will be easy if i wanna change it.
(https://i.hizliresim.com/o6p3rk.jpg)
Thats a PC/ps3 Controller.
(https://i.hizliresim.com/lbpjvb.jpg)
And Finish 8o 8o
(https://i.hizliresim.com/WGvYWN.jpg)
(https://i.hizliresim.com/6yVnY3.jpg)
(https://i.hizliresim.com/nJpMLl.jpg)(https://i.hizliresim.com/vJV5n6.jpg)
-
Wow. Welcome to the forum. That thing is friggin awesome!
-
That is one seriously badass cabinet.
-
thank you guys :)
-
Work of art, The one playerness of it makes me sad though. Any plans on doing a swappable two player panel?
-
Beautiful build! :cheers:
-
Work of art, The one playerness of it makes me sad though. Any plans on doing a swappable two player panel?
i already make 2player control panel. But i like 1 player panel :)
-
:applaud: Very nice. Good woodsmanship.
Only bit I'm not sure about is those two blue blocks at the back of the CP - what they for?
-
Only bit I'm not sure about is those two blue blocks at the back of the CP - what they for?
Faux card reader.
Amazing work , I feel you on the single player panel. I play solo more than co-op.
-
Only bit I'm not sure about is those two blue blocks at the back of the CP - what they for?
Faux card reader.
Amazing work , I feel you on the single player panel. I play solo more than co-op.
Thank you
yes you are right I'm playing solo too ;)
-
Nice build, very impressive! :cheers: I was thinking that's a lot of real estate for just a 1P control panel as well but easy enough to change out when you want.
-
looks very polished and very well done. Perhaps one of the best of the vewlix done so far.
-
looks very polished and very well done. Perhaps one of the best of the vewlix done so far.
thanks you :)