Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: arcadejuinkie on November 18, 2017, 06:52:40 pm

Title: Ultimarc LED wire help
Post by: arcadejuinkie on November 18, 2017, 06:52:40 pm

Ok so I abandoned my previous setup that came as I bought it on my gpwiz40 as the previous owner wired it so bassackwards that I just went ultimate i/o route. When i’m Wiring up the black connector to the end of the r/g/b/y wires I see the triangle so is that where yellow wire goes?  If so what is the order from there for the r/g/b wired?  If there is a link or something I can be pointed to that works too. 

TIA!!

Title: Re: Ultimarc LED wire help
Post by: gumby510 on November 18, 2017, 11:44:34 pm

The order is printed right on the board


Sent from my iPhone using Tapatalk

Title: Re: Ultimarc LED wire help
Post by: arcadejuinkie on November 19, 2017, 12:38:43 am

So the + sign is the yellow wire then?  Wow. I was way over thinking things lol

Title: Re: Ultimarc LED wire help
Post by: Titchgamer on November 19, 2017, 01:28:52 am

Yep,

RGB red green blue wires.
Then the yellow :)