Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: bimm25e on August 24, 2017, 04:29:18 pm

Title: PS3 SCART -> VGA Adapter - > RGB
Post by: bimm25e on August 24, 2017, 04:29:18 pm

so anyone know of an adapter with a female scart input that has a VGA(DE-15) on the other side?
I want to use a ps3 scart cable to get RGB signal then send it through a jpac's vga port and I'm hoping to avoid sending an analog signal though an ebay SCART coupler if possible.


thanks!

Title: Re: PS3 SCART -> VGA Adapter - > RGB
Post by: mourix on August 25, 2017, 02:32:44 pm

If that adapter existed, it would confuse a lot of people because it won't work on a vga monitor..

It's not too hard to solder one up, though!

Title: Re: PS3 SCART -> VGA Adapter - > RGB
Post by: voltz on August 26, 2017, 12:13:23 am

I'm surprised you don't go the hdmi to vga route.

Btw, what is the resolution output you're planning to use? 

Title: Re: PS3 SCART -> VGA Adapter - > RGB
Post by: bimm25e on September 01, 2017, 04:24:31 pm

Quote from: voltz on August 26, 2017, 12:13:23 am

I'm surprised you don't go the hdmi to vga route.

Btw, what is the resolution output you're planning to use?

Well I have a cabinet, with a 15 kHz monitor in it

I use a J-PAC  to pass a computer with CRTEmudriver through VGA to the 15khz monitor.

I want to wire in a KVM that switches audio and video going to the J-PAC between the PC and an empty Female SCART port that will take RGB from a console (modded if need be)  and shoot it to the screen through the J-PAC (video amp) and my audio amp which both go straight to the cab.



I have a female scart port but need to wire it up still, audio L/R is easy enough but what pins do I need to wire the RGB (don't care about component/composite/s-vid) video signal between the scart socket and the DB-15 (vga) pins going tinto the J-PAC?