Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Abear on August 12, 2017, 09:55:54 am
-
Wondering if anyone else had a problem with the Ipac2 not recognizing a spinner. I have everything working great including a 3" trackball pulled from a Golden Tee cab. I wired the Oscar spinner to the expansion pins using:
Brown - +5V
Yellow - X1
Green - X2
White - GND
I tested the spinner's CB and it is receiving 5V between the brown and white connections. The Ipac2's expansion interface is disabled in Winipac. What else could I check to determine if it's software or a defective spinner CB?