Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: AnthonyPaulO on August 11, 2017, 12:53:06 am

Title: Rampart and Trackball sensitivity?
Post by: AnthonyPaulO on August 11, 2017, 12:53:06 am

Hello everyone,

I recently had a MAME arcade cabinet made for me with a three-trackball setup using U-Traks. As soon as I roll the ball I see something is very wrong; the cursor barely moves. I have to roll it hard and fast to get it to move a couple of inches. Does anyone know whether this is a U-Trak issue, config issue, or perhaps I should have gone with the original Happs?

Thanks!

Anthony

Title: Re: Rampart and Trackball sensitivity?
Post by: Titchgamer on August 11, 2017, 01:57:06 am

You can adjust the sensitivity and speed of each game individually in MAME through the Analogue settings menu.

Try that first :)

Title: Re: Rampart and Trackball sensitivity?
Post by: AnthonyPaulO on August 11, 2017, 11:46:50 pm

Ohhhh... I'm using 64 bit Mame but the UI looks like the one in Mame32 plus (http://atariage.com/forums/uploads/monthly_11_2015/post-8029-0-47477700-1448087821.jpg (http://atariage.com/forums/uploads/monthly_11_2015/post-8029-0-47477700-1448087821.jpg)) and I would right click on a game and select properties and couldn't find any settings in there. Now I saw a youtube video where you can bring up a mame menu in the middle of a game and that had the Analog settings you're talking about. What key do I press for that to pop up?

Title: Re: Rampart and Trackball sensitivity?
Post by: yamatetsu on August 12, 2017, 12:47:59 am

TAB.

Title: Re: Rampart and Trackball sensitivity?
Post by: AnthonyPaulO on August 12, 2017, 01:08:59 am

Son of a bee... I'll check and see if those settings work.

Title: Re: Rampart and Trackball sensitivity?
Post by: AnthonyPaulO on August 17, 2017, 08:58:46 am

This worked! I was able to change the sensitivity settings through the Analog Controls. Thanks everyone! :D

Title: Re: Rampart and Trackball sensitivity?
Post by: DeLuSioNal29 on August 17, 2017, 10:44:58 am

Woot!  Glad it got resolved.

DeL

Title: Re: Rampart and Trackball sensitivity?
Post by: Titchgamer on August 17, 2017, 10:51:18 am

Glad you sorted it :)