Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: tylerwerrin on August 09, 2017, 07:57:38 pm
-
Hi guys,
I've been struggling to get this to work for months:
So I have a GPWiz 40+, with two joysticks (player 1 & 2) and eight buttons for each player, plus a trackball. I've been trying and trying to get the LED's mapped correctly to MAME through LED Blinky but it just won't work. I have already set up all my ports, etc, and the lights all work on their own. The trouble is getting it to integrate with Mame.
If I set default controls in Mame, the Joycode changes from "Joy 1" to "Joy 4". Player 2 also changes from "Joy 1" to "Joy 4". The GPWiz seems to see Player 1 and Player 2 as the same, only with different button mapping. For instance, Player 1 "Button 1" would show up as Button 1, but Player 2 "Button 1" would show up as Button 26.
This doesn't really matter for MAME as a button is a button, but integrating it with LED Blinky, I'm having trouble because there are only 16 buttons for each Player in LED Blinky - if a button is showing up as 26, I don't have a port to match that, so the button does not light based on my LED Blinky Output Map.
I've tried using RocketBlinky, and have found that if I leave the Mame default settings to for Joy 1 and Joy 2 and individually set up each game's controls it will work OK, but it's a huge hassle.
Is there anyone out there willing to check out my setup on Teamviewer to see what I'm doing wrong, or if anyone can suggest a way around this? Or is this just the way it is?