Build Your Own Arcade Controls Forum

Main => Project Announcements => Topic started by: Slotman2012 on July 03, 2017, 04:32:52 pm

Title: Lazertron matchem up to 60n1 conversion
Post by: Slotman2012 on July 03, 2017, 04:32:52 pm

So I decided to convert an old ticket redemption game over to a 60n1 and these are the results. Not too bad. A couple of things to add is yes I know it is a LCD and not a crt but for this build the cabinet will not fit a crt because it is not deep enough since it wasn't originally an arcade game.   Used a 60n1 kit and artwork from arcadegraphix on eBay.

(https://uploads.tapatalk-cdn.com/20170703/73d49ea17f04a5bb14779ffcdf999cee.jpg)
(https://uploads.tapatalk-cdn.com/20170703/f8a8a6fdb53545b01aebc429f0e451d4.jpg)

(https://uploads.tapatalk-cdn.com/20170703/ef8c0ceb121d58342d5eeb714d333025.jpg)

(https://uploads.tapatalk-cdn.com/20170703/766f29eb9247abd51c4d6d98769f064d.jpg)

(https://uploads.tapatalk-cdn.com/20170703/22ff043b1a1d0eeb09c0fa00557797e7.jpg)


Sent from my iPhone using Tapatalk

Title: Re: Lazertron matchem up to 60n1 conversion
Post by: SuperGojira2001 on July 08, 2017, 08:32:17 pm

Eh it looks ok. A 4:3 monitor might of been better as the 16:9 monitor kinda stretches the image.