Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Baezl on May 11, 2017, 11:27:36 am

Title: X-Arcade Solo Dimensions Request
Post by: Baezl on May 11, 2017, 11:27:36 am

This is probably a long shot but I am looking for the dimensions of the X-Arcade Solo base.  I am looking for the following if anyone with one of these can help:

1 - Side boards (Length, height at the front and height at the back - to determine angle)
2 - Front board (Height X Length)
3 - Rear board (Height X Length)

I have just the top portion with no base and want to get the base as close as possible to include the tilt.

It is highly appreciated.  Thank you. 

Luis

Title: Re: X-Arcade Solo Dimensions Request
Post by: nexusmtz on May 28, 2017, 10:48:47 pm

The 3/16" thick base boards are beveled at 45 degrees to fit together, so all pieces cover the length or width. (more likely, a single board was cut, routed at the three corner/fold points, and folded into a rectangle.)

The base is a rectangle 13 3/4" x 7 1/2"
The front of the base is 2"
The back of the base is 3 1/4"