Build Your Own Arcade Controls Forum
Main => Raspberry Pi & Dev Board => Topic started by: bytestorm on April 26, 2017, 02:39:29 pm
-
Hey all! :)
I have a strange issue. I have tried 2 differend RPI3 with original powesupply and another random 2.5A 5v psu but no luck. (tried different scar cables also)
After a clean install of retropie 4.2 and editing the config file with these extra lines:
disable_audio_dither=1
dtparam=audio=on
dtoverlay=vga666
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #240p
I get a really nice bootlogo, and I can see the text start scrolling, but a few seconds in the screen turns pinkish/redish and looks all wierd :/
I have tried 3 different CRT sets, (lumatron, philips, sony trinitron) and all 3 gets this wierd issue. (all 3 pal tvs but should support)
What am I missing? How come the picture looks good in the first few secs and then just changes? What really happens in those bootsteps? Its so fast I cant read it.
Heres a clip of what happens (sorry for the TATE view but I didnt think about it at the moment filming)
https://youtu.be/mSBWAvBAf1M (https://youtu.be/mSBWAvBAf1M)
Anything else I need to change? (without changing the config all works perfect on my hd lcd via hdmi)
Thanks in advance for reading :D
Best regards from Sweden // Stefan