Build Your Own Arcade Controls Forum

Main => Project Announcements => Topic started by: Caparo8bit on February 14, 2017, 10:51:57 pm

Title: ISO ideas for a bar/arcade
Post by: Caparo8bit on February 14, 2017, 10:51:57 pm

Hello there . I need some ideas I'm building a bar in my RV  and planing to add an arcade the question is how to hide the 2 players controls  that will be located on the bar the screen will be located in the corner between the two windows . Thanks and sorry for my bad grammar. TIA (https://imgur.com/a/GTYWu)
https://imgur.com/a/GTYWu (https://imgur.com/a/GTYWu)

Title: Re: ISO ideas for a bar/arcade
Post by: keilmillerjr on February 14, 2017, 11:10:37 pm

Scrap that whole idea and buy an original crt cocktail cabinet to enjoy your drinks at. Make your bad flush against the wall in a self serve manner.

Title: Re: ISO ideas for a bar/arcade
Post by: Titchgamer on February 15, 2017, 03:46:11 am

Why not build it into the bar?

Title: Re: ISO ideas for a bar/arcade
Post by: BadMouth on February 15, 2017, 07:41:25 am

I remember seeing a bar with tilt out controls one time.  It looked useable.

The hinge was on the bottom back edge of the control panel so that when flipped up the bottom looked like a decorative panel on the bar.

They were long skinny control panels so they could be kept higher on the front of the bar.

Title: Re: ISO ideas for a bar/arcade
Post by: leapinlew on February 15, 2017, 10:12:09 am

Maybe this?
http://forum.arcadecontrols.com/index.php?topic=83438.0 (http://forum.arcadecontrols.com/index.php?topic=83438.0)

Title: Re: ISO ideas for a bar/arcade
Post by: pbj on February 15, 2017, 10:41:44 am

Quote from: leapinlew on February 15, 2017, 10:12:09 am

Maybe this?
http://forum.arcadecontrols.com/index.php?topic=83438.0 (http://forum.arcadecontrols.com/index.php?topic=83438.0)

That surprisingly doesn't look like it sucks.

Title: Re: ISO ideas for a bar/arcade
Post by: BadMouth on February 15, 2017, 12:33:53 pm

Quote from: leapinlew on February 15, 2017, 10:12:09 am

Maybe this?
http://forum.arcadecontrols.com/index.php?topic=83438.0 (http://forum.arcadecontrols.com/index.php?topic=83438.0)

Probably, but in my head it was only 2 player and each player's section was separate.   :P

Title: Re: ISO ideas for a bar/arcade
Post by: Caparo8bit on February 17, 2017, 08:07:51 pm

Thanks  y'all (https://imgur.com/a/6C5I6) work in progress Bar-cade control panel
https://imgur.com/a/6C5I6 (https://imgur.com/a/6C5I6)