Build Your Own Arcade Controls Forum
Main => Software Forum => Topic started by: waxtrax on February 09, 2017, 08:14:13 am
-
Have a mame j-pac jamma cab set up and running Maximus. Everything a-ok, controls are set. Went on and hacked a pair of USB speakers. All fine.
Fire up the cab a day later - no I have no control input? Very odd imo.
When I run a PCB there everything is fine. Don't get it..tried a different j-pac no difference. Mame without front end will not register input from the cab as well.
Any idea what might have happened?
Thnx.
-
Is it registering anything when you go into the set controls menu?
-
Hi!
No nothing in mame (GM). But then again all input is working on a jamma pcb.
-
This is becoming stranger by the minute..
The non-working stick n buttons now work. I unplugged the USB speakers and 3,5 cable and move them to the front. Now everything seems to work.
I/O conflict? Whatcha think?
Now the other cab that has been working doesn't have any inputs. :badmood:
I did try this in the first non working cab. J-Pac got a burn? From what in that case?
-
Solved, case closed.
-
So what was it? Incase anyone has similar issue? :p
-
Wax Trax. Nice.
-
Wax Trax. Nice.
...tomorrow's playlist for work