Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: batchman77 on December 13, 2016, 09:47:32 am
-
Hi All,
First post on the forum... I was lucky enough to get hold of a stand up Sega Lindburgh machine in the summer and have been working to get it with a usable HyperSpin setup (SimplyAustin on You Tube was a massive help with his videos).
The issue I am having is that I cannot get the display to show a complete full screen even with the PC set at the native resolution of 1366x768. If I switch from VGA to DVI connections it sometimes will go full but for a short time and then in DVI input the screen freezes after about a min. It's not far off with about 20mm of black boarder on each side but I would like to get it all the way.
I would like to replace the screen with a HD TV but fit it in the existing bezel/cabinet so it does not look like it has been changed, has anybody done this successfully and if so any pics or guidance you can offer.
(https://dai2uw.bn1303.livefilestore.com/y3m3U4_KD7Pkh4BQ-4EG7oyaMIFv4r2r-Ei3rkjLgtVJohFU1zuWUl0k4tYdORpLcEtXUqp2k1iY-l4B4VWAYTiGKKYqy3RZnJ-WH_EyOi-J5YaQJ8mtWn-VfM8JWClxqi4Je9dvFnCA8DXOhjcQmv7U2jfwwxqYyMx1QhTPRVcyuA?width=371&height=660&cropmode=none)
Much appreciated.
Martin