Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: jhonny_d on December 07, 2016, 06:53:34 am

Title: Mame output info needed
Post by: jhonny_d on December 07, 2016, 06:53:34 am

Hello, I'm toying with a few ideas regarding exotics controllers :) and I need some info about mame output possibilities

1)Aimtrak guns kickback each time a shot is fired, would it be possible to set up everything so the recoil is activated only when there are bullets in the magazine ?

2)Does mame supports analog outputs? I would like to create a Densha De Go panel which uses analog speedometers

Thanks!

Title: Re: Mame output info needed
Post by: jhonny_d on December 08, 2016, 09:20:00 am

Done some research, about question one, would mame hooker combined with an output board like the pac-drive allow me to control the gun solenoid?

Title: Re: Mame output info needed
Post by: BadMouth on December 08, 2016, 09:36:36 am

You might check with charlieram if he's still around.

http://forum.arcadecontrols.com/index.php/topic,134098.msg1382204.html#msg1382204 (http://forum.arcadecontrols.com/index.php/topic,134098.msg1382204.html#msg1382204)

http://forum.arcadecontrols.com/index.php/topic,132537.0.html (http://forum.arcadecontrols.com/index.php/topic,132537.0.html)

Title: Re: Mame output info needed
Post by: jhonny_d on December 08, 2016, 10:22:13 am

thanks, from what I get that's possible

unfortunately I tried mamehooker and wasn't able to detect any output with all the roms I tried

Title: Re: Mame output info needed
Post by: BadMouth on December 08, 2016, 10:29:44 am

Quote from: jhonny_d on December 08, 2016, 10:22:13 am

thanks, from what I get that's possible

unfortunately I tried mamehooker and wasn't able to detect any output with all the roms I tried

I think outputs were messed up/deleted in MAME for some recent versions.
Pretty sure there's a thread about it in the software subforum.
You might try a version around the 150's, or see what version charlieram is using.

EDIT: Also keep in mind that MAME is made up of a bunch of different parts, meant to emulate different arcade hardware, written by a lot of different people.
Some games have the outputs emulated, some (most?) do not.

Title: Re: Mame output info needed
Post by: jhonny_d on December 08, 2016, 11:23:33 am

thanks for the help, probably it's the mame version fault, since I tried dig dug that's used from howard casto as an example in the tutorial

Title: Re: Mame output info needed
Post by: Howard_Casto on December 08, 2016, 01:52:41 pm

I made it a point some years ago to hook up any gun game I possibly could.  So unless it has been removed, it's a Namco game, or the game never had outputs to begin with you should have some outputs to work with.