Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: mike boss on November 26, 2016, 12:28:27 pm
-
I was working on my Final Fight today and I wanted to utilize my 6-in-1 Jamma switcher.
In the same cabinet I'm using one of them RGB to VGA boards and a scanline generator.
The Final Fight board was hooked up and running on the LCD monitor with no issues.
So today I hook up the switcher and plug in my Final Fight, POW, and WWF Wrestlefest.
Nothing displays! I tested each board without the switcher and the boards are fine.
Am I missing something simple ? I did note that the Final Fight was playing blind with the switcher and the LCD read "no signal."