Build Your Own Arcade Controls Forum

Arcade Collecting => Merit/JVL Touchscreen => Topic started by: gmtransman2 on November 22, 2016, 09:01:28 pm

Title: megatouch rx keeps rebooting after cmos battery died
Post by: gmtransman2 on November 22, 2016, 09:01:28 pm

rx with a intel mb in it the cmos battery died replaced battery now just keeps rebooting. have reset date time and loaded defalts, saved before i exit cmos. replaced hard drive same thing. any ideas thanks

Title: Re: megatouch rx keeps rebooting after cmos battery died
Post by: mahkeymike on November 22, 2016, 09:16:04 pm

Where does it reboot and is there any error on the screen before it reboots? Reason being, if your IOboard isnt being detected it will cause a reboot loop. Any hardware change or failure will cause a reboot loop. If you replaced the hard drive, that would rule out corrupt data.

Title: Re: megatouch rx keeps rebooting after cmos battery died
Post by: gmtransman2 on November 22, 2016, 10:23:27 pm

it has no red failed  all green ok it goes all the way up to localhost login than reboots

Title: Re: megatouch rx keeps rebooting after cmos battery died
Post by: gmtransman2 on November 26, 2016, 08:27:29 pm

last thing is says is
usb 2-1: usbsf:   interface 0 claimed by usbtouchscreen while 'twdriver' sets config #1
than reboots and reboots???

Title: Re: megatouch rx keeps rebooting after cmos battery died
Post by: lilshawn on November 29, 2016, 06:04:50 pm

try going into the bios and loading the default configuration. sometimes something gets enabled or disabled in the bios that throws things into a boot loop.

double check that the computer is set to turn on after an AC power loss.

Title: Re: megatouch rx keeps rebooting after cmos battery died
Post by: gmtransman2 on January 16, 2017, 04:35:18 pm

i got it going dip switch #6 on instead of #3, third from the right instead of the left. thanks all for the help.