Build Your Own Arcade Controls Forum

Main => Project Announcements => Topic started by: marcux on November 08, 2016, 08:16:47 pm

Title: My first hyperspin/mame cabinet build! led buttons and marquee screen.
Post by: marcux on November 08, 2016, 08:16:47 pm

Here is a link to the video: https://www.youtube.com/watch?v=_ho8x-BAZV0 (https://www.youtube.com/watch?v=_ho8x-BAZV0)


I got the buttons from Paradise arcade shop, it IL translucent buttons http://paradisearcadeshop.com/il-psl-hoku/1309-il-psl-hoku-concave-pushbutton.html (http://paradisearcadeshop.com/il-psl-hoku/1309-il-psl-hoku-concave-pushbutton.html)
and the RGB Inserts I used from Paradise were: http://paradisearcadeshop.com/button-leds/1835-il-lumination-rgb-5vdc-led-rev-a.html (http://paradisearcadeshop.com/button-leds/1835-il-lumination-rgb-5vdc-led-rev-a.html)
I used a ipac Ultimate as the controller: https://www.ultimarc.com/ipacuio.html (https://www.ultimarc.com/ipacuio.html)
I used some Sanwa JLF-TP-8YT joysticks with aluminum bat tops as the joysticks, and sourced non rgb buttons from ebay (start/credit/system buttons)
I got the 10' lcd and main screen from ebay. the main screen was a 26" samsung t260 mounted upside down for better viewing angle and fixed in windows software rotation.
The Cabinet was an old Golden Tee cab that was stripped down, repainted and a new control panel built, new plexi, new marquee added etc.
It took me approximatly 2 month to build to where it is now from all those parts. I already had the PC which has an i5 and a gtx 980 sitting around that i re-purposed.

Title: Re: My first hyperspin/mame cabinet build! led buttons and marquee screen.
Post by: ivwshane on November 08, 2016, 08:53:23 pm

Looks good. I like the use of a secondary screen, very original.

Title: Re: My first hyperspin/mame cabinet build! led buttons and marquee screen.
Post by: leapinlew on November 08, 2016, 10:17:40 pm

Nice. My last arcade cabinet was a golden tee also!

Title: Re: My first hyperspin/mame cabinet build! led buttons and marquee screen.
Post by: marcux on November 19, 2016, 09:12:26 am

I've got another waiting on my next build, lol..

(http://i.imgur.com/tVlx9Kt.jpg)

Title: Re: My first hyperspin/mame cabinet build! led buttons and marquee screen.
Post by: marcux on November 19, 2016, 09:14:08 am

Here is another video of the led blinky setup this is before I added the lcd in the middle, I also have wii working now.


https://www.youtube.com/watch?v=UlpsIzYov9A&t=3s (https://www.youtube.com/watch?v=UlpsIzYov9A&t=3s)