Build Your Own Arcade Controls Forum
Main => Software Forum => Topic started by: Justn on November 06, 2016, 02:40:31 pm
-
Heys guys i have a question. I set up my gun in windows and i did find lots of info on the forums so i did the required steps in mame.ini and such. When i set the in game controls inside mame i shows my gun as both gun1 and mouse1 is that normal? For example im setting the gun x/y axis it comes up as lightgun x axis = "gun1 x" or "mouse1 x" same for trigger: gun1 button 0 or mouse1 button 0. I didnt think it was a big deal but games that have off screen reload seems to have issues. When i click off screen i get a windows "ding" sound and mame loses focus and im forced to shoot the trigger a few times at the screen to regain focus and im still unable to reload my gun. Any ideas guys?
-
No they usually just shot as gun.
Have you got your gun set as mouse in mame?
-
In mameui I went the default controls menu and set lightgun from mouse to lightgun. After that i went to mame.ini to confirm the changes and it shows lightgun_device lightgun. Also set lightgun from 0 to 1 Not sure whats going on with it. I use a trackball as well so i have mouse set to 1 in mame.ini. could that cause an issue or am i missing something?
-
Change it back to mouse maybe see if that works?
I dont use mameui.
I use a trackball, spinner n 2 guns with no probs
-
Ok i changed that now it shows up as a mouse only in the in game mame controls but still getting the issue with reloading it plays a windows ding sound and loses focus amd doesn't reload. Maybe i should remove the guns and reset mame controls and try again from scratch ?