Build Your Own Arcade Controls Forum

Main => Artwork => Topic started by: Sky25es on October 05, 2016, 04:47:16 pm

Title: Finally finished my marquee... and the rest of the Artwork
Post by: Sky25es on October 05, 2016, 04:47:16 pm
Update: See below

I finally finished my marquee (nearly).
I just have to decide now if I should remove some elements or change something, so any advice, suggestions or critics will be highly appreciated.

        Here, version #1

(http://i.imgur.com/OJ6t4LO.jpg)

        Version #2, with "Dirk" on the bottom right corner


        Version #3 + Sir Arthur from Ghosts 'n Goblins...

(http://i.imgur.com/PthD4mf.jpg)





Update:

Ok. I removed a lot of the characters from the marquee, as suggested by Yotsuya, Pbj and Titchgamer (sorry Guys but I have to keep some of them ;) and finished the Sideart, Bezel, Kickplate and Control Panel, so if you have any suggestions or feedback before I send this all for printing...  ;)

(http://i.imgur.com/kBLds00.jpg)



(http://i.imgur.com/NGUnAqh.jpg)



(http://i.imgur.com/GGKzCGb.jpg)



(http://i.imgur.com/HRXzFbB.jpg)



(http://i.imgur.com/opPdCIH.jpg)
Title: Re: Finally finished my marquee
Post by: yotsuya on October 05, 2016, 08:27:02 pm
Lose all the characters and make the title really stand out.
Title: Re: Finally finished my marquee
Post by: pbj on October 05, 2016, 08:42:26 pm
I agree with yotsuya,  that'll look great without all the characters on it.

Title: Re: Finally finished my marquee
Post by: Titchgamer on October 06, 2016, 01:57:55 am
As above, loose the characters.
Its a little busy!
Title: Re: Finally finished my marquee
Post by: Sky25es on October 06, 2016, 04:51:27 am
yeah you're right. That's what I thought too... It's a little bit overcharged...
Thanks for the advice guys  :cheers:
Title: Re: Finally finished my marquee... and the rest of the Artwork
Post by: Sky25es on November 04, 2016, 12:07:00 am
Ok. Finished all the Artwork. See the first post. ;)
Title: Re: Finally finished my marquee... and the rest of the Artwork
Post by: Titchgamer on November 04, 2016, 04:27:00 am
The marquee is much better but ime still not sold on the positioning of DK, Mario, Bub & Bob as they look like they are floating there.
Can you intergrate them a little better? Give them a reason to be there or something to sit on?

The rest of the artwork is good.
My only criticism of the CP is it does not look symmetrical (always a prob with lines I guess)
But I think it would benefit from shifting P2 controls a little to the left so the gaps either side are a little more equal.

Obv thats only of the room is available to do it ;)
Title: Re: Finally finished my marquee... and the rest of the Artwork
Post by: Sky25es on November 05, 2016, 02:03:14 am
The marquee is much better but ime still not sold on the positioning of DK, Mario, Bub & Bob as they look like they are floating there.
Can you intergrate them a little better? Give them a reason to be there or something to sit on?

The rest of the artwork is good.
My only criticism of the CP is it does not look symmetrical (always a prob with lines I guess)
But I think it would benefit from shifting P2 controls a little to the left so the gaps either side are a little more equal.

Obv thats only of the room is available to do it ;)

Thanks again. I moved the p2 joystick as suggested, more to the left (that's the max I can move it without interfering with the spinner or the third joystick) and modified the Artwork a bit.

(http://i.imgur.com/pGjihGR.jpg)


and as a bonus: Bub & Bob with something to sit on.

(http://i.imgur.com/CgsD2p3.jpg)

(It's only a joke)  ;)
Title: Re: Finally finished my marquee... and the rest of the Artwork
Post by: Titchgamer on November 05, 2016, 03:58:11 am
Yup that cp looks much better nice job
Title: Re: Finally finished my marquee... and the rest of the Artwork
Post by: BorgDog on November 05, 2016, 09:20:42 pm
3 8-way joysticks?  or is the third a 4-way?  If 4-way, I would lose the diagonal arrows.
Title: Re: Finally finished my marquee... and the rest of the Artwork
Post by: Sky25es on November 06, 2016, 01:22:03 am
3 8-way joysticks?  or is the third a 4-way?  If 4-way, I would lose the diagonal arrows.

No. There are 2 rotary 8 ways and an 4-8 ways switchable u360.
Title: Re: Finally finished my marquee... and the rest of the Artwork
Post by: sellsellsell2000 on November 10, 2016, 08:55:05 pm
When designing a custom cabinet, avoid throwing in random characters. Is like driving a Honda civic adding bmw/ Mercedes logos etc. On to the car. Just my two cents.