Build Your Own Arcade Controls Forum

Main => Raspberry Pi & Dev Board => Topic started by: cudbur on August 25, 2016, 10:43:06 pm

Title: Laser cut acrylic arcade box
Post by: cudbur on August 25, 2016, 10:43:06 pm

I just received the laser cut parts for my latest arcade control box design that will hold a Raspberry Pi. I'm not done with the internals yet, but here's the frame assembled:

(http://i.imgur.com/GjdS4yj.jpg)
(http://i.imgur.com/WbBV3MJ.jpg)
(http://i.imgur.com/HpYvEwQ.jpg)
(http://i.imgur.com/ZJBrUYN.jpg)

The walls are 1/4-inch acrylic and are screwed into MDF corners with 3D printed rounded corners. I'm also 3D printing the mounting brackets for the various electronics inside. Here's the plan:

ultimark servostick
ipac2
raspberry pi 3

(http://i.imgur.com/ldRAKTP.jpg)
(http://i.imgur.com/99KVdvU.png)

3D printed port:
(http://i.imgur.com/Ux5Bg4i.png)

Thanks for looking!

Title: Re: Laser cut acrylic arcade box
Post by: Titchgamer on August 26, 2016, 01:37:07 am

Ile be interested to see how this comes out :)

Title: Re: Laser cut acrylic arcade box
Post by: Locke141 on August 26, 2016, 03:02:08 am

Very nice so fare.