Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Andy_Bogard on July 29, 2016, 07:21:56 am

Title: Mortal Kombat 2 issues : reboots when pressed on "start" and gameover scree
Post by: Andy_Bogard on July 29, 2016, 07:21:56 am

Hi,
My MK2 PCB reboots after I press start button and randomly shows the gamoover screen.

All tests are OK, tension Ok (i tested it in my MK3 cabinet which works fine)

Any idea, advice?

Thanx!

AB

Title: Re: Mortal Kombat 2 issues : reboots when pressed on "start" and gameover scree
Post by: Karetaker on September 04, 2016, 04:50:03 pm

Re-seat all the socketed chips (push on them) WITH THE MACHINE OFF! Check your 5v voltage and make sure you are not low or high.

Title: Re: Mortal Kombat 2 issues : reboots when pressed on "start" and gameover scree
Post by: MK3FAN on September 15, 2016, 08:41:07 pm

This is somewhat common. Usually when this happens, there is a leg lifted off the main controller/processor UE13. Re-flow them all.