Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: tonychua on July 25, 2016, 02:22:05 pm

Title: J-pac in Sega Versus City
Post by: tonychua on July 25, 2016, 02:22:05 pm

Quick question guys.. Will the video output of j-pac work with 2 arcade crt monitors? I'm planning on mounting it on a Sega Versus City cab.

Thanks in advance!

Title: Re: J-pac in Sega Versus City
Post by: MTPPC on July 26, 2016, 02:52:18 pm

You may need some kind of amplifier. https://www.monoprice.com/product?c_id=101&cp_id=10104&cs_id=1010401&p_id=4903&seq=1&format=2 (https://www.monoprice.com/product?c_id=101&cp_id=10104&cs_id=1010401&p_id=4903&seq=1&format=2) this might work, but you would have to use these: http://www.ebay.com/itm/Cga-to-Vga-or-Vga-to-Cga-Adapter-cga-vga-vga-cga-Arcade-Monitor-Converter-/120967813463 (http://www.ebay.com/itm/Cga-to-Vga-or-Vga-to-Cga-Adapter-cga-vga-vga-cga-Arcade-Monitor-Converter-/120967813463)

Title: Re: J-pac in Sega Versus City
Post by: brad808 on July 26, 2016, 03:39:32 pm

Jpac works fine. That's what I run in mine. No extra equipment necessary.

Title: Re: J-pac in Sega Versus City
Post by: tonychua on July 29, 2016, 01:11:40 am

I can confirm this works perfectly. My jpac arrived and tested it myself.  :applaud:

Title: Re: J-pac in Sega Versus City
Post by: brad808 on July 29, 2016, 09:06:50 am

If you have auto switching ms9 monitors in there do yourself a favor and pull all the video jumpers off the jpac. Then solder pin 13 and pin 14 together on the VGA input connector. That will allow you to switch between 15khz and 24khz games without the jpac turning into a useless piece of garbage.