Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: Thamiel on March 30, 2016, 07:58:45 am

Title: CRT Emudriver 2.0 - 31k Modelines
Post by: Thamiel on March 30, 2016, 07:58:45 am

Hey guys, just picked up a 7850 and have been giving the new drivers a go. Install went very smoothly, just want to make sure my modelines look right. Only have 3 installed, log attached.

I used my old 31k SuperRes list (from cools example settings).

EDIT: Nah, i've definitely done something wrong. MK2 is displaying at 2560x960i

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Thamiel on March 31, 2016, 06:57:28 pm

Any of you guys running 2.0 have any ideas? Actually I should probably post some more info, will do when I'm home.

Sent from my C6603 using Tapatalk

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Calamity on April 01, 2016, 03:53:57 am

If you're using the arcade_31 preset, try increasing the Hfreq max value a little bit. You need a 2560x512 mode in there for mk.

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Thamiel on April 06, 2016, 06:45:31 am

Quote from: Calamity on April 01, 2016, 03:53:57 am

If you're using the arcade_31 preset, try increasing the Hfreq max value a little bit. You need a 2560x512 mode in there for mk.

Gave that a go but i'm still missing something I think, some modelines arn't getting installed by vmm. Attached a log and the modelines i'm getting.

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Calamity on April 06, 2016, 07:31:39 am

Please post your preset (crt_range).

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Thamiel on April 07, 2016, 08:55:48 am

No worries.

monitor "arcade_31", "Arcade 31.5 kHz - high resolution", "4:3"
        crt_range0 31400-31500, 49.50-65.00, 0.940, 3.770, 1.890, 0.349, 0.064, 1.017, 0, 0, 384, 480, 768, 960

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Thamiel on April 12, 2016, 07:16:27 pm

Having more success using a different preset, though things still arn't 100% right. rsgun is defintely picking a wrong resolution and ending up squished in the middle. I've attached the new preset, vmm install log and the modelines installed. When you have a sec i'd apprecite your thoughts.

Incidentally, I found the signal chart for my monitor (Nanao MS2934). Just not sure how to go about transferring that to a monitor preset.

(http://www.mediafire.com/convkey/bbd1/z43j3b2nrz6cobdzg.jpg?size_id=8)

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Calamity on April 13, 2016, 01:57:29 pm

Quote from: Thamiel on April 12, 2016, 07:16:27 pm

rsgun is defintely picking a wrong resolution and ending up squished in the middle. I've attached the new preset, vmm install log and the modelines installed.

Three files attached but not the one we need: groovymame log.

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Thamiel on April 13, 2016, 04:50:01 pm

Quote from: Calamity on April 13, 2016, 01:57:29 pm

Quote from: Thamiel on April 12, 2016, 07:16:27 pm

rsgun is defintely picking a wrong resolution and ending up squished in the middle. I've attached the new preset, vmm install log and the modelines installed.

Three files attached but not the one we need: groovymame log.

Apologies, log is attached. It's the 720x480p mode being selected that's squashed and incorrect.

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Calamity on April 13, 2016, 04:53:50 pm

Set "resolution 2560x0" in mame.ini, since you're using super resolutions. That will fix it.

Title: Re: CRT Emudriver 2.0 - 31k Modelines
Post by: Thamiel on April 14, 2016, 03:56:13 am

Thanks mate, that got it. Forgot to put that back in after I tried again with a new mame.ini