Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: campbell87 on March 14, 2016, 06:48:45 am

Title: T2 arcade help
Post by: campbell87 on March 14, 2016, 06:48:45 am

Hi Guys,

I have recently purchased a T2 arcade cab in really good condition. Guns work etc and the display is good. I have a few issues that im hoping someone can help with.

The image on the screen has a slight wobble to it, you cant notice it that much when playing but it is slightly annoying.

there is slight discoloration in the screen which i assume will need degaussing? The chassis i have is a wei-ya. Not sure on the model of it as it came already in the cab

the grounding appears to be ok, i have moved the transformer to try get rid of the wobble but its not helping.

The degaussing cable, when connected to the chassis will trip the fuse :s. If i remove it then its fine.

the tube i have is a Zenith EIA 1101 25"

any help would be much appriciated.

Thanks

Dan

Title: Re: T2 arcade help
Post by: paigeoliver on March 14, 2016, 01:53:41 pm

Recap the monitor and see if the degauss cable still trips the fuse and see if your other problem goes away.

Ultimately step 1 to any monitor problem is recapping it because almost every monitor problem can possibly be caps.

Title: Re: T2 arcade help
Post by: campbell87 on March 15, 2016, 11:23:53 am

Thank you, il give that a go. I have a wei-ya chassis, do you know what kit i could use for this?

Title: Re: T2 arcade help
Post by: paigeoliver on March 16, 2016, 03:17:30 pm

Quote from: campbell87 on March 15, 2016, 11:23:53 am

Thank you, il give that a go. I have a wei-ya chassis, do you know what kit i could use for this?

If no one sells an off the rack kit for your chassis then you have to write them down and order them individually from mouser. Wei-ya likely makes more than one model so you need the model too.